ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 30 results ...

Adeyemi, B S and Aigbavboa, C O (2020) Conflict factors investigation among construction professionals in Nigeria. Journal of Engineering, Design and Technology , 18(05), 1121–37.

Aghimien, D O, Aigbavboa, C O, Oke, A E and Thwala, W D (2019) Mapping out research focus for robotics and automation research in construction-related studies. Journal of Engineering, Design and Technology , 18(05), 1063–79.

Arowoiya, V A, Oke, A E, Aigbavboa, C O and Aliu, J (2020) An appraisal of the adoption internet of things (IoT) elements for sustainable construction. Journal of Engineering, Design and Technology, 18(05), 1193–208.

Asad, M M, Hassan, R B, Sherwani, F, Rind, I A and Maiji, Y (2019) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation. Journal of Engineering, Design and Technology , 18(05), 959–71.

Blindheim, J, Elverum, C W, Welo, T and Steinert, M (2020) Concept evaluation in new product development. Journal of Engineering, Design and Technology , 18(05), 1139–51.

Borer, J (2020) Object oriented design of safety critical programmable equipment systems. Journal of Engineering, Design and Technology , 18(05), 1081–9.

Chaparro, D A, Ying, F J, Rotimi, F E and Egbelakin, T (2020) Commute and labour productivity: investigation of inner city construction sites. Journal of Engineering, Design and Technology , 18(05), 1305–19.

Dave, N, Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology , 18(05), 1321–33.

Davila Delgado, J M and Oyedele, L O (2020) BIM data model requirements for asset monitoring and the circular economy. Journal of Engineering, Design and Technology , 18(05), 1269–85.

Derradji, R and Hamzi, R (2020) Multi-criterion analysis based on integrated process-risk optimization. Journal of Engineering, Design and Technology , 18(05), 1015–35.

Eziefula, U G, Opara, H E and Eziefula, B I (2020) Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria. Journal of Engineering, Design and Technology , 18(05), 1053–61.

Fei, C, Xiahou, P and Wang, F (2020) Design and control of grid connected inverter for harmonic suppression. Journal of Engineering, Design and Technology , 18(05), 1349–56.

Gamil, Y, A. Abdullah, M, Abd Rahman, I and Asad, M M (2020) Internet of things in construction industry revolution 4.0. Journal of Engineering, Design and Technology , 18(05), 1091–102.

Gbadamosi, S L and Nwulu, N I (2020) Optimal planning of renewable energy systems for power loss reduction in transmission expansion planning. Journal of Engineering, Design and Technology , 18(05), 1209–22.

Gharehbaghi, K, McManus, K, Hurst, N, Robson, K and Myers, M (2019) Complexities in mega rail transportation projects. Journal of Engineering, Design and Technology , 18(05), 973–90.

Gupta, N K and Thakre, G D (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology , 18(05), 1357–70.

Jun, Z, Akbar, M A and Xin lei, W (2020) Optimization of design and measurement principle of six-components force/thrust measurement stand. Journal of Engineering, Design and Technology , 18(05), 1371–9.

• Type: Journal Article
• Keywords: Force/thrust measurement; Optimization; Numerical simulations;
• ISBN/ISSN: 1726-0531
• URL: https://doi.org/10.1108/JEDT-12-2019-0334
• Abstract:
  The purpose of this study is to present the optimization of the design and measurement principle of a six-component force/thrust measurement stand. This study highlights some key problems found in previous studies and proposes improvements in design and measurement principles. The numerical simulation approach is used to verify the proposed improvements. An improved design and measurement principle are proposed and to verify the proposed improvements, simulation experiments are conducted. The data obtained from simulations are analyzed through the proposed improved measurement principle. The proposed stand is capable of measuring the main thrust and other components as pitch, yaw and roll. The stand is capable of measuring the main thrust more than 50,000 N and orthogonal thrust components more than 1,000 N. Improved design of measurement stand is also capable of measuring moments in three-axis more than 150 Nm. Thrust stand consists of two main sections: front and rare. Stand consists of seven piezoelectric force sensors to measure all components of force. The simulations experiments and basic theoretical laws of kinematics prove that the proposed design indeed improves the precision of measurement and also enhance the efficiency of design. Evaluation results show that the measurement stand designed is highly functional. Non-linearity, coupling and repeatability errors are found to be within acceptable range during numerical simulations. This study is unique in this kind. This study identifies the key problems found in previous studies and proposes an improved design and measurement principle. This study provides evidence for the improvements to be really functional and necessary.

Khamseh, A and Marei, P (2020) Designing a model developed to assess the capabilities of technological innovation in Iranian construction of power plant equipment industries. Journal of Engineering, Design and Technology , 18(05), 1241–9.

Li, H, Xia, Q, Wang, L and Ma, Y (2020) Sustainability assessment of urban water environment treatment public-private partnership projects using fuzzy logic. Journal of Engineering, Design and Technology , 18(05), 1251–67.

Mbae, A M and Nwulu, N I (2020) Day-ahead load forecasting using improved grey Verhulst model. Journal of Engineering, Design and Technology , 18(05), 1335–48.

Okampo, E J and Nwulu, N I (2020) Optimal energy mix for a reverse osmosis desalination unit considering demand response. Journal of Engineering, Design and Technology , 18(05), 1287–303.

Osman, B and Zhu, H (2020) A virtual educational model on a CNC milling machine including and excluding two methods of fuzzy controllers. Journal of Engineering, Design and Technology , 18(05), 1153–63.

Sibanda, V, Mpofu, K, Trimble, J and Kanganga, M (2019) Development of part families for a reconfigurable machine. Journal of Engineering, Design and Technology , 18(05), 991–1014.

Singh, T, Kalra, M and Misra, A K (2020) Simplified probabilistic seismic assessment of dampers in tall and braced structures in buildings. Journal of Engineering, Design and Technology , 18(05), 1037–52.

Wang, L (2020) Home intelligent lighting control system based on wireless sensor. Journal of Engineering, Design and Technology , 18(05), 1231–40.

Woju, U W and Balu, A (2020) Fuzzy uncertainty and its applications in reinforced concrete structures. Journal of Engineering, Design and Technology , 18(05), 1175–91.

Woju, U W and Balu, A (2020) Time-dependent safety performance of reinforced concrete structures. Journal of Engineering, Design and Technology , 18(05), 1103–20.

Xia, Y (2020) Research on dynamic data monitoring of steel structure building information using BIM. Journal of Engineering, Design and Technology , 18(05), 1165–73.

Yan, J (2020) 3D printing optimization algorithm based on back-propagation neural network. Journal of Engineering, Design and Technology , 18(05), 1223–30.

Zadok, Y (2019) Project-based learning in robotics meets junior high school. Journal of Engineering, Design and Technology , 18(05), 941–58.